 Basic headlining install -
page 3
Overhang
You will also notice the new headlining has
a fair amount of overhang, this is to ensure there is more than enough to go
around all the bends. This will need to be cut off once the headlining has
been stretched and glued/held into position.
We generally use small off cuts of
pinchweld to secure it into place until the glue has dried.
This photo show the headlining starting to
take shape, the headlining has been stretched from front to back and left to
right, only small off cuts of pinchweld are holding it.
Headlining all stretched out, will need to
be glued and the overhang cut off all the way around, fairly easy to do, they
can be fitted with the windscreens in, however we do recommend taking them out
to ensure a perfect fit.
Page
2
3
|
